Why doesn't eyebrow tattooing take?
Encyclopedic
PRE
NEXT
1. Oily Skin Causes Eyebrow Tattooing to Fail to Take Color
Girls with oily skin are most prone to eyebrow tattooing failing to take color. This is primarily due to excessive sebum secretion, which prevents pigment from distributing evenly.
2. Lack of experience causes poor pigment retention
Inexperienced technicians may also fail to achieve proper color retention during the procedure. This often stems from their inability to adjust needle length appropriately, resulting in inadequate pigment absorption.
3. Dull Needles Preventing Pigment Take
Some studios, aiming to save time, fail to check needle sharpness before use or neglect the "one needle per client" principle. This results in blunt needles, causing poor pigment absorption.
4. Inadequate pigment concentration control causing poor color retention
Improper management of pigment concentration—whether too thick or too thin—can result in poor color retention during the procedure.
5. Inadequate control of tattooing depth causing poor pigment retention
During the procedure, the tattoo artist's control over the depth of the tattooing can easily lead to poor pigment retention. Tattooing too deeply or too shallowly are both causes of this issue.
6. Simultaneous application and wiping prevents pigment absorption
Inexperienced technicians often wipe the area while applying pigment. This wipes away pigment before the skin absorbs it, explaining why many clients experience poor color retention.
7. Incorrect angle causing poor pigment retention
Improper angle during the procedure frequently leads to poor pigment retention. Eyebrow tattooing demands high technical skill. Therefore, it's crucial to choose a reputable medical aesthetic clinic for low-risk, high-quality results.
8. Insufficient Anesthesia Duration Causes Poor Pigmentation
Inadequate anesthesia duration can lead to poor pigmentation. When the skin perceives pain, capillaries constrict, preventing proper pigment absorption.
9. Improper Pigment Concentration Causes Poor Pigmentation
Incorrect pigment concentration—whether too thick or too thin—will result in poor eyebrow tattooing.
Post-Eyebrow Tattoo Care Instructions
1. Redness and swelling may occur after the procedure. Apply cold compresses to the affected area to reduce swelling. Place ice cubes in an ice pack, wrap it in a sterilized towel, and apply for 20-30 minutes. Never place ice packs or ice directly on the wound to prevent infection from water seeping into the injury.
2. Avoid seafood and alcohol for 1-3 days post-procedure. These irritants may trigger allergic reactions or swelling, compromising the tattoo results.
3. Post-procedure, the treated area may show signs of infection. To prevent this, apply topical anti-inflammatory medication twice daily for three consecutive days. This promotes wound healing and safeguards the tattoo results.
4. For optimal recovery, disinfect and clean the area daily. Keep the wound dry and hygienic to prevent bacterial contamination.
5. As the wound heals, scabbing will occur. Do not touch the scabs; allow them to fall off naturally. Avoid exposure to hot water or steam while scabbing to prevent softening or premature shedding, which could affect color retention.
Eyebrow Shaping Steps
1.Locate the brow peak and tail positions
The tail is positioned where the line extending from the nostril to the outer eye meets the horizontal line of the brow head. The most standard placement is slightly higher than this intersection.
2. Begin outlining the upper edge where hairs grow downward
Start drawing at the junction where upward-growing and downward-growing hairs meet. Ensure the line does not extend beyond the tail or the upper edge of the brow.
3. Draw the lower edge of the eyebrow
Ensure all edges stay within the natural brow contour. Position your strokes 1-2mm inward from the outer edge. Begin at the brow's center and extend toward the tail.
4. Neatly trim the lower edge of the tail
After outlining the brows lightly, use the curved tip of small scissors to smoothly trim into an arc.
6. Outline the upper edge with a lighter shade of eyebrow powder.
Gently sweep a shade lighter than your base color along the upper contour to create a light-top, dark-bottom dimensional effect.
7. The lightest shade must be at the brow head
The lightest area of the entire eyebrow should be at the brow head.
8. Apply tinted mascara
Apply tinted mascara from the front to the tail. For the front section, brush upward against the hair growth. For the back section, brush downward with the hair growth. Finally, brush through the entire brow once to finish.
PRE
NEXT